Other Equipment (Special)
SMC has specialty equipment that can be used for various Machine Tool Industry needs.
IR, Precision Regulator
Series IR Precision Regulators are designed to be compact and light weight. The maximum set pressure has been expanded from the conventional 0.7MPa to 0.8MPa. Relief flow has been increased by nearly 5 times (compared to SMC IR201, IR401). The optional bracket and pressure gauge can be mounted on either the front or back of the unit.
VBA**A, Booster Regulator
彩票大赢家The specialty regulator series VBA is a booster regulator that saves money and energy by increasing the main line pressure up to two times. The booster regulator, when connected to air supply line, increases pressure up to two times and the main air supply pressure may be set low. Desired pressure increase can be easily adjusted.
VBAT-X105, Air Tank, ASME Stamped
The VBAT series tanks are designed to directly mate with VBA boosters to add a reservoir of higher pressure air to the system. With such a reservoir of high pressure air, the booster is able to charge the system during periods of low demand. Available in carbon or stainless steel, the tanks are available in four sizes from 5 to 38 liters in capacity. Models are available to meet various regional pressure vessel regulations.
AL*00, Large Flow Lubricator
AL8/900 series large flow lubricators generate proportional oil delivery in 1-1/4”~2” lines. AL430/460 micro mist lubricators produce an oil fog that remains suspended in the air stream over longer piping distances. All types are available in North American, European metric, and standard metric configurations.
LMU, Mist Spray Unit
The series LMU spray unit is used to deliver atomized lubrication to up to six individual points. Air pressure, air flow lubricant quantity independently adjustable. The unit is electrically switched to spray lubricant or, as required to blow air only. The LMU can be used to spray oil, kerosene, cutting fluid and a wide range of other fluids. It has applications in machine tools, roll forming machines, die casting for the spraying of mold release and other manufacturing processes where lubricant or coolant spray is required.
LMV, Mist Spray Mixing Valve
LMV series mixing valve is used with the LMU mist spray unit. A needle valve is installed in the air passage of the mist generating mixing valve, hence it is possible to vary the size of the mist particles by regulating the flowrate.
AEP100, Liquid Collector, Exhaust Pressure Type
HEP, Liquid Collector, Ejector Type
The HEP collects and reuses leaked fluids such as valuable cutting oil and grinding oil.
PA, Process Pumps
Series PA is a double acting, compact, large capacity diaphragm pump suitable for transfer and recovery of a wide variety of fluids. The PA series is available in 3 types; automatically operated, air operated or automatically operated with a built-in pulsation attenuator.
PB, Process Pumps
The PB series is a compact, single acting diaphragm pump which is suitable for transfer and recovery of a wide variety of fluids. The PB series is available with a built-in solenoid valve or in an air operated style. Space is saved due to the centralization of piping and wiring areas on the top and bottom surfaces.