Blow Off Equipment
Discover our energy-efficient solutions for contaminant blow off.
VMG, Blow Gun, Standard Type
Series VMG has a large effective area of 0.05in² (30mm²), without nozzle. Pressure loss is 0.725psi (0.005MPa) or less when nozzle bore size 2.5mm is used. Piping direction is optional from the top or bottom. Available nozzles include: male thread; high efficiency; low noise w/male thread; and extension nozzles.
KN, Air Nozzles
With the release of the KN series nozzles and gauge heads 30~90% of air consumption required for the current nozzle operation can be saved with the appropriate selection of the new nozzle and sizing. Many variations of nozzle are available with tube materials including nylon, soft nylon, soft copper pipe and OST tubing. Sizes range from 4mm-20mm.
TCU, Polyurethane Coil Tubing
The TCU series is a polyurethane coil tubing that is very flexible and makes compact piping possible. The TCU series comes in three different tube sizes and comes in the standard color of black.
PFMB, Digital Air Flow Sensor, 2-Color Display, IP40, 2-200 Lpm
PFMB7201 is a digital flow sensor compatible with air and nitrogen. Its thermal sensor is protected in a bypass flow path to reduce contact with moisture and contaminants, avoiding accuracy deterioration and damage. Dimensions and weight have been reduced dramatically compared to the legacy PF2A. The 3-digit LED display can be red or green, changing when a set point is reached. Either instantaneous or accumulated flow can be shown. Options include inline or bottom piping entry, cable connector type, a manual flow adjustment valve, and panel or bracket mounts. Two outputs are available, including two switch signals, or a switch and analog signal. PFMB is IP40 rated, and C-UL-US, CE and RoHS compliant.
PFMC, Digital Air Flow Sensor, 2-Screen 3-Color Display, IP65, 5-2000 Lpm
2/3 Port Valves for Fluid Control
VX2, 2 Port Direct Solenoid Valve, Ports 1/8 ~ 1/2 inch
The VX2 series is 2 port direct solenoid valve for general purpose air, medium vacuum and water. Available body materials include resin, aluminum, brass or stainless steel with port size up to 1/2 inch. Resin body is offered with one touch fitting to reduce installation time. It is also available as a manifold to reduce piping.
VXD, Valves Air/Water – 2 Port Pilot Solenoid Valve
彩票大赢家The updated VXD series is a pilot operated, 2 port solenoid valve. The new VXD is not only smaller, but uses less power compared to the previous version. Available in brass and stainless steel, the VXD series also offers low concentration ozone resistant and oil free options. Flow rate ranges from Cv of 1.9 to 49.
VXZ, Pilot Operated, 2 Port Solenoid Valve for Air, Single Unit
彩票大赢家 The VXZ series for air is a 2 port, pilot operated solenoid valve capable of operating at higher differential pressures by maintaining a zero differential pressure on the seat. Available with resin, aluminum, brass or stainless steel body material. Standard NBR seal and optional FKM for use with ozone resistant applications. Available in port size 1/4 to 1 inch. Flow rate ranges from Cv of 1.7 to 9.4.
VQ20/30, 2 Port Solenoid Valve, Pilot Operated
彩票大赢家 The VQ20/30 series is a pilot operated, two port multi-media valve. The series is compact and lightweight with a large flow capacity. The VQ20/30's long life, high speed coil (up to 20 million cycles at 100cps for pneumatic use) along with its all plastic construction make it an excellent choice for those who want high performance at a lower cost.