Automatic Door and Transfer Equipment
During the process of handling, positioning and inspection of parts it is necessary to make precise movements to guarantee the quality of the final product.
Below we show you a wide range of products to suit the needs of each application.
JCM, Round Body Air Cylinder
Series JCM double acting, single rod, stainless steel tube cylinders are compact, and lightweight. ?The JCM series delivers extra flexibiity including the option of male and female rods.
JMB, Tie Rod Air Cylinder
Series JMB tie rod actuators are double acting, single rod, compact and lightweight。 The JMB is available in intermediary bore sizes so that larger bores have the same external dimensions as standard bore sizes。
JCQ, Compact Air Cylinder
Series JCQ Compact Actuators are double acting, single rod, compact and lightweight.
SMC has a range of standard, made to order, and specialized cylinders?with a combination of stainless steel construction, water resistant seals, and special rod scrapers designed to prevent corrosion from exposure to water or coolant。
JMGP, Compact Guided Cylinder
Series JMGP compact guided actuators are double acting, compact and lightweight. The JMGP is suitable for pushing, lifting or clamping applications.
MGP, Standard Guided Cylinder
Series MGP is designed for high side load applications found in material handling, lifting and stopping。 The cylinder utilizes an ultra-compact design by incorporating the cylinder body as part of the guide body。 As the stroke length increases, so does the bearing length, thus enhancing the cylinder's load bearing capacity。 Order made options for this series include adjustable air cushions, heavy duty guide rods, copper free, high temperature, and low speed。
CNA2, Cylinder w/Lock
The CNA2 series cylinder with lock is suitable for mid-stroke stops, emergency stops, and drop prevention. An equal holding force in extending and retracting directions make it possible to lock at either end of the stroke. High reliability and stable holding force are maintained by using a substantially lengthened brake shoe with superior wear resistance. The locking mechanism is isolated from lock release air, so lock function is not diminished by excessive dirt or drain in compressed air.
CNS, Locking Large Bore Cylinder
The CNS series cylinder with lock is ideal for applications requiring intermediate and emergency stop and drop prevention。 The compact lock unit saves space and the enclosed construction and separation of the lock mechanism and the unlocking piston chamber minimizes the influences of poor air quality。
CLS, Locking Large Bore Cylinder
The CLS series cylinder with lock is ideal for applications requiring intermediate and emergency stop and drop prevention。 The compact lock unit is lightweight and saves space。 A switch is optional on the brake cylinder so the operating state of the lock unit (brake piston) can be detected using the switch signal。 By separating the lock mechanism and the brake cylinder, SMC has minimized the influences of unlocking air quality such as moisture and condensation。
CLQ, Compact Cylinder with Lock彩票大赢家
Compact cylinder series CLQ offers drop prevention when the pressure of air source is decreased or the residual pressure is released.?The?CLQ?has a low profile design, with a compact lock unit.? Available in?8 bore sizes ranging from?20 to 100mm, and is auto switch capable.
RLQ, Compact Cylinder with Air Cushion and Lock
Series RLQ was developed to provide the safety of drop prevention, at any point of the stroke, should the air supply be cut off。??The RLQ benefits from additional features such as its own built in air cushion and lock unit, standardized bypass piping and home position holding function。?The new series RLQ is the perfect solution for applications which require larger kinetic energy, high stroke repeatability and decreased sound levels。 Series RLQ, is currently available in bore sizes of 32, 40, 50 and 63mm, with standard stroke options of between 20 – 100mm, series
MLU, Plate Cylinder with Lock
Plate cylinder with lock series MLU is ideal for maintaining supply pressure to prevent dropping of the load when residual pressure is released. Drop prevention is possible at any point of stroke. Lock positions can be changed to accommodate the position of the external stopper and the thickness of the clamped work piece.
MLGP-B/F, Standard Guided Cylinder with One-way Lock
彩票大赢家 The MLGP-B/F is a compact body, locking actuator integrated with internal guide shafts to isolate the load bearing from the movement of the actuator's rod and seals. The locking mechanism can be specified for either the extension side (F) or the retraction side (B) of the stroke. The brake spring, locking mechanism will engage when air pressure is lost for drop prevention applications and can be released by reintroducing air pressure or via a manual process. The (L) high precision ball bushing allows for smooth operation that ensures stable travel resistance, suitable for pushing and lifting applications. The (M) carbon steel alloy slide bearing provides lateral stability protecting it from side load impacts, suitable for stopping applications.
MY1*W, Rodless Cylinder, Mechanically Jointed with Protective Cover彩票大赢家
The MY1W Rodless Cylinders have a one-piece carriage and piston that runs its entire stroke length housed with an inner seal belt to maintain air pressure combined with an outer dust cover for dustproofing and water resistance。 A side seal option is available for added protection in harsher environments。 This design offers a compact footprint compared to rod-style cylinders and features a low profile。 It is available in either an integrated slide bearing guide for lateral stability providing to protect from side load impacts or an integrated cam follower guide to provide smooth and precise slide table movement。 Air cushions are standard and external shock absorbers are optional。
RHC, High Power Cylinder
High speed or high load cylinder applications frequently require additional speed and flow control devices to control the stopping of the load。 SMC's RHC series features a longer cushion design which is capable of stopping heavy or high speed loads while maintaining the simplicity of a standard air cushion cylinder。 This enhanced cushion allows the kinetic distance, which results in the ability to absorb up to 23。8 ft-lb of energy and operate reliably at speeds up to 118 in/sec。 Even with the improved performance of the RHC, cushion adjustment remains as simple as adjusting the cushion needle valve。?
MK-Z Swing Clamp Cylinder彩票大赢家
SMC's MK-Z has an allowable moment of inertia 3 times higher than the conventional MK and MK2 styles。? The overall length is the same as the conventional styles, and mounting dimensions are interchangeable with the MK series。? Auto switches can be mounted on any of the 4 surfaces with no projection of the switch。
MHZ2, 2 Finger Air Gripper, Parallel Type
Gripper series?MHZ2 has an integrated linear guide for high rigidity, positioned with two dowel pins to prevent guide slippage. It has mounitng versatility on three sides, in five configurations. Available in single acting (N.O., N.C.) and double acting.
MHS3, 3 Finger Air Gripper, Parallel Style
Gripper series MHS utilizes a wedge cam design to minimize their overall size while retaining a high holding force。
ZK2, Energy Saving Vacuum Generators
The ZK2*A series is an energy-saving generator with 93% reduced air consumption。? It has a 50% increase in suction flow compared to other single stage SMC generators。? The ZK2*A also has various mounting options to choose from。
ZH, Vacuum Generator, Body Ported彩票大赢家
Vacuum Generator series ZH offers a compact and light weight point-of-use generator with standard flow and large flow capability. There are two types available: box type with a silencer exhaust and body ported type with individual exhaust. Also, these generators are often smaller and lighter than the bulky vacuum lines used in central vacuum systems. Available in various nozzle diameters and a number of port sizes.
The ZPT series suction cups are available in diameters from 2 to 125mm, 6-cup materials, and 4-cup designs (flat, flat with ribs, deep and bellows), to suit multiple applications. Vertical vacuum entry connections can be made via one-touch fittings or threaded connections. Optional buffers can be ordered with up to 50mm stroke.? SMC's ZP2 series vacuum?pads are available in?diameters from 2 to 340mm, and offer a variety of?pad materials and designs. The ZP2 series was designed to standardize special products designed for the ZP series.? Pad types include: miniature cups, compact cups, nozzle cups, multi-bellows cups, sponge cups, mark-free cups, oval cup variations, and heavy-duty cup variations.? Optional buffers can be ordered with up to 100mm stroke.? The ZP3 line of suction?cups has a compact pad and the buffer?body has been shortened by as much as 2.2" when compared to the ZP series.? The optional buffer can be ordered with up to 20mm stroke.
LEFS, AC Servo Sliders, Ball Screw Drive彩票大赢家
LEFB, AC Servo Sliders – Belt Drive
LEJS, AC Servo Sliders – High Rigidity Ball Screw
LEJB, Electric Actuator, High Rigidity Slider Type, Belt Drive
LEL Electric Actuator/Guide Rod Slider, Belt Drive, Step Motor (Servo/24 VDC)
LEM, Electric Actuator, Low Profile Slider, Step Motor (Servo/24 VDC)
LEY, Electric Actuator, Rod Type
LEYG, Electric Actuator, Guide Rod Type
LES, Electric Slide Table
LES and LESH integrate a work table, linear guide and a motor driven linear ball screw。 ?The work table offers top and front load mounting surfaces。 Underneath, the linear guide maintains positional accuracy and supports moment loading。
LEPS, Electric Slide Table, Miniature Type
LER, Electric Rotary Table
LEH, Electric Grippers
LEY-X5, Electric Actuator, Rod Type, Dust/Drip Proof (Step Motor: Servo 24VDC; Servo Motor: 24VDC)
The X5 option, available for the LEY series in sizes 25 and 32, is a dust and drip proof specification equivalent to IP65. For DC motor models, the spec is achieved by enclosing the motor in a sealed aluminum cover with a special cable connector, and pairing the rod with a scraper and lub-retainer. Additionally, the body extrusion includes a vent hole and fitting to balance internal pressure so that dust and water are not drawn in.
Controllers and Drivers
彩票大赢家Controllers and drivers needed for our electric actuator family. ?You will find step motor, servo motor and card motor controllers as well as 24VDC Fieldbus gateway units and AC servo drivers.
CH(D)Q, Compact Type, Low Pressure Hydraulic Cylinder
CH series hydraulic cylinders are available in compact, round body, JIS or tie-rod types. Nominal pressure ranges from 3.5MPa to 16MPa. Bore sizes are available, depending on the series, from 20 to 160. Auto switches are available on most models.
CHN, Small Bore Hydraulic Cylinder
CH series hydraulic cylinders are available in compact, round body, JIS or tie-rod types。 Nominal pressure ranges from 3。5MPa to 16MPa。 Bore sizes are available, depending on the series, from 20 to 160。 Auto switches are available on most models。
CH(D)2, Tie Rod Hydraulic Cylinder
CH2 double acting hydraulic cylinders conform to JIS?B 8367?specifications.? Surge pressure generated when running into the cushion has been reduced by 30% or more compared to the CH series, due to the CH2's cushion seal system.? Separate construction of the rod cover simplifies maintenance.? Available in bore sizes 32mm to 100mm.??All series types are available with auto switch capability with the exception of the steel tube type.